GFX_Designs
13 diciembre 2022, 10:34
https://i121.fastpic.org/big/2022/1213/17/ca3fb5b6f5883efffa91bf665583aa17.jpeg
InventorCAM 2022 SP2 with Documentation & Thaining Materials | 9.9 Gb
Product:InventorCAM
Version:2022 SP2 with Documentation & Thaining Materials
Supported Architectures:x64
Website Home Page : www.solidcam.com
Languages Supported:multilanguage
System Requirements:Windows *
Software Prerequisites:Pre-installed InventorCAM 2018-2022
Size:9.9 Gb
Languages Supported: ??, ?eština, Dansk, Nederlands, English, Français, Deutsch, ?????, Magyar,
Italiano, ???, ???, Polski, Português, ???????, Español, Türkçe
SolidCAM is pleased to announce the availability of new version CAM software - InventorCAM 2022 SP2. The major base release presents new upcoming exciting functionality including Hole Wizard enhancements, Associative Coordinate Systems, CAM Part configurations, U-axis & Collinear Axis Support, iTurning, Automatic Templates and SolidCloud.
SOL-22192 Toolkit / renumbering tools / index numbers change
SOL-22351 First/last movement feed type is not rapid
SOL-22386 Use twisted zero point the positions and angles are correct but the simulation is not
SOL-22413 Sim 4x Turning / First move is not Rapid
SOL-22447 Machine Simulation / Diagonal movement in MCO
SOL-22661 QA / THSR / Arcfit / Few toolpath passes color gets changed
SOL-22687 machine simulation shows wrong tool
SOL-22703 G-code/Some @arc procedures are skipped
SOL-22722 Multiaxis / Solid Verification reports gouge for gouge free tool path
SOL-22736 G-code/Wrong lpos for wrapped drill if defined on position
SOL-22740 GUI/Reset All button doesn't reset the numbers that indicate the order of rotations
SOL-22755 G-code/hpos seems wrong
SOL-22771 G-code/Approximate arc by lines is not precise enough
SOL-22775 Turning / Second Setup / Cannot calculate due to (wrong) Fixture Protection
SOL-22776 HSR/ Rest roughing/ Stock defined by selected operations is not updated
SOL-22790 HSR / GUI is not correct
SOL-22828 G-code/opos is not correct when using indexial angle and there is some shift in the Setup
SOL-22891 GUI/Portuguese version issues
SOL-22945 Solid Verify Simulator/ All Operations/ Adapter is not visible while simulation
SOL-22989 2D Drill/We have an orange coordinate system if the drill depth is not defined
SOL-22995 Turning/Geometry on solid/ Delete chain or face from "DELETE" on keyboard (like for wireframe geometry)
SOL-22996 CAM Tree/ Split of GCODE change the order of operations in CAM Tree
SOL-23010 Machine Simulation /3D Cutter/ The tool is not send to the Machine Simulation because of the Insert joint rotation
SOL-23023 Machsim/ Spindle direction wrong
SOL-23057 MCO/ Submachine Movement/ Wrong Part Position when we add Movement action in the Submachine
SOL-23110 SV Sim / adaptor is not shown anymore
SOL-23129 SolidVerify/3D Tool/wrong simulation
SOL-23137 Contour 5x/Unknown Exception
SOL-23158 Taper cutter is displayed incorrectly in machine simulation
SOL-23213 G-code/FCS/home_user_name variable is not working correctly
SOL-23222 MT-Counter Spindle not possible to change to second angle
SOL-23223 Bore recognition geometry is not adopted
SOL-23224 Milling - Tool not correctly positioned in spindle in machine simulation
SOL-23329 Turning / grooving / no finish toolpath
SOL-23334 ToolKit/Pick point option not working correctly for non-cutting points of holders
SOL-23346 Probe comes from the wrong side in SolidCAM Simulator with NP2-1
SOL-23368 Tool Kit STL Threading Insert Angle
SOL-23380 Template group - no longer possible to click on associative areas
SOL-23395 Turning/Approach Retract point/Same than approach and Left or Righ corner doesnt works correctly together
SOL-23396 Associative CS/ Create a position 2 of MAC2 on Position 1 use Position 1 of MAC1 instead of MAC2
SOL-23400 Engraving || not able to select text while creating engraving TP
SOL-23402 Profil3D/Compensation/extra movement at arc endpoint
SOL-23446 Part Upper Level /Associated Lower Level Drifting
SOL-23449 ToolKit/Switching tool that are defined as permanent change the tool number and tool offset
SOL-23454 Setup/MachinePreview/Show part in MS or BS regarding location before opening MP
SOL-23488 ToolKit /3D STL Tool cutting length problem in Inch part Fixed
SOL-23554 VMID/ Multi-cutter tool item set to YES asks to save VMID with no changes made
Enhancements
- SolidCAM for Operator(Shop Floor Editor)
- New Geometry Selection style for Pocket as in iMachining 2D (Beta)
https://i121.fastpic.org/big/2022/1213/27/df8135f7825e11bfdce97cf4ea635927.jpeg
SolidCAMis recognized as the world leader in seamless integration of CAM in leading CAD products, SolidWorks andInventor, supporting the complete range of CNC manufacturing applications, including iMachining 2D/3D, 2.5D milling, high-speed surface milling, 3D high-speed machining, multi-sided indexial 4/5 axes milling, simultaneous 5 axes milling, multi-channel mill-turn, Swiss-type machining and probing. SolidCAM has been a consistent growth leader in CAM.
SolidCAM 2022 - New Functionality - Part 1
SolidCAM2022 What's New - Part 2
SolidCAM,a global leader in innovative CAM software for CNC machining and distribution of related digital manufacturing solutions, has more than 20,000 CNC manufacturing customers worldwide
***Contenido oculto. Abra la versión completa del tema para visualizar los enlaces.***
Links are Interchangeable - No Password - Single Extraction
InventorCAM 2022 SP2 with Documentation & Thaining Materials | 9.9 Gb
Product:InventorCAM
Version:2022 SP2 with Documentation & Thaining Materials
Supported Architectures:x64
Website Home Page : www.solidcam.com
Languages Supported:multilanguage
System Requirements:Windows *
Software Prerequisites:Pre-installed InventorCAM 2018-2022
Size:9.9 Gb
Languages Supported: ??, ?eština, Dansk, Nederlands, English, Français, Deutsch, ?????, Magyar,
Italiano, ???, ???, Polski, Português, ???????, Español, Türkçe
SolidCAM is pleased to announce the availability of new version CAM software - InventorCAM 2022 SP2. The major base release presents new upcoming exciting functionality including Hole Wizard enhancements, Associative Coordinate Systems, CAM Part configurations, U-axis & Collinear Axis Support, iTurning, Automatic Templates and SolidCloud.
SOL-22192 Toolkit / renumbering tools / index numbers change
SOL-22351 First/last movement feed type is not rapid
SOL-22386 Use twisted zero point the positions and angles are correct but the simulation is not
SOL-22413 Sim 4x Turning / First move is not Rapid
SOL-22447 Machine Simulation / Diagonal movement in MCO
SOL-22661 QA / THSR / Arcfit / Few toolpath passes color gets changed
SOL-22687 machine simulation shows wrong tool
SOL-22703 G-code/Some @arc procedures are skipped
SOL-22722 Multiaxis / Solid Verification reports gouge for gouge free tool path
SOL-22736 G-code/Wrong lpos for wrapped drill if defined on position
SOL-22740 GUI/Reset All button doesn't reset the numbers that indicate the order of rotations
SOL-22755 G-code/hpos seems wrong
SOL-22771 G-code/Approximate arc by lines is not precise enough
SOL-22775 Turning / Second Setup / Cannot calculate due to (wrong) Fixture Protection
SOL-22776 HSR/ Rest roughing/ Stock defined by selected operations is not updated
SOL-22790 HSR / GUI is not correct
SOL-22828 G-code/opos is not correct when using indexial angle and there is some shift in the Setup
SOL-22891 GUI/Portuguese version issues
SOL-22945 Solid Verify Simulator/ All Operations/ Adapter is not visible while simulation
SOL-22989 2D Drill/We have an orange coordinate system if the drill depth is not defined
SOL-22995 Turning/Geometry on solid/ Delete chain or face from "DELETE" on keyboard (like for wireframe geometry)
SOL-22996 CAM Tree/ Split of GCODE change the order of operations in CAM Tree
SOL-23010 Machine Simulation /3D Cutter/ The tool is not send to the Machine Simulation because of the Insert joint rotation
SOL-23023 Machsim/ Spindle direction wrong
SOL-23057 MCO/ Submachine Movement/ Wrong Part Position when we add Movement action in the Submachine
SOL-23110 SV Sim / adaptor is not shown anymore
SOL-23129 SolidVerify/3D Tool/wrong simulation
SOL-23137 Contour 5x/Unknown Exception
SOL-23158 Taper cutter is displayed incorrectly in machine simulation
SOL-23213 G-code/FCS/home_user_name variable is not working correctly
SOL-23222 MT-Counter Spindle not possible to change to second angle
SOL-23223 Bore recognition geometry is not adopted
SOL-23224 Milling - Tool not correctly positioned in spindle in machine simulation
SOL-23329 Turning / grooving / no finish toolpath
SOL-23334 ToolKit/Pick point option not working correctly for non-cutting points of holders
SOL-23346 Probe comes from the wrong side in SolidCAM Simulator with NP2-1
SOL-23368 Tool Kit STL Threading Insert Angle
SOL-23380 Template group - no longer possible to click on associative areas
SOL-23395 Turning/Approach Retract point/Same than approach and Left or Righ corner doesnt works correctly together
SOL-23396 Associative CS/ Create a position 2 of MAC2 on Position 1 use Position 1 of MAC1 instead of MAC2
SOL-23400 Engraving || not able to select text while creating engraving TP
SOL-23402 Profil3D/Compensation/extra movement at arc endpoint
SOL-23446 Part Upper Level /Associated Lower Level Drifting
SOL-23449 ToolKit/Switching tool that are defined as permanent change the tool number and tool offset
SOL-23454 Setup/MachinePreview/Show part in MS or BS regarding location before opening MP
SOL-23488 ToolKit /3D STL Tool cutting length problem in Inch part Fixed
SOL-23554 VMID/ Multi-cutter tool item set to YES asks to save VMID with no changes made
Enhancements
- SolidCAM for Operator(Shop Floor Editor)
- New Geometry Selection style for Pocket as in iMachining 2D (Beta)
https://i121.fastpic.org/big/2022/1213/27/df8135f7825e11bfdce97cf4ea635927.jpeg
SolidCAMis recognized as the world leader in seamless integration of CAM in leading CAD products, SolidWorks andInventor, supporting the complete range of CNC manufacturing applications, including iMachining 2D/3D, 2.5D milling, high-speed surface milling, 3D high-speed machining, multi-sided indexial 4/5 axes milling, simultaneous 5 axes milling, multi-channel mill-turn, Swiss-type machining and probing. SolidCAM has been a consistent growth leader in CAM.
SolidCAM 2022 - New Functionality - Part 1
SolidCAM2022 What's New - Part 2
SolidCAM,a global leader in innovative CAM software for CNC machining and distribution of related digital manufacturing solutions, has more than 20,000 CNC manufacturing customers worldwide
***Contenido oculto. Abra la versión completa del tema para visualizar los enlaces.***
Links are Interchangeable - No Password - Single Extraction