Xilinx Zynq-7000 SoC Board Support Packages 2020.1
Xilinx, Inc., the leader in adaptive and intelligent computing, is pleased to announce the availability of Zynq-7000 SoC Board Support Packages 2020.1 is a collection of libraries and drivers that will form the lowest layer of your application software stack.
Xilinx Zynq-7000 SoC Board Support Packages 2020.1 | 170.2 mb
Board Support Package (BSP) is the collective term referring to all of the software components required to match a given operating system (and its environment) to a given hardware design (board). BSPs commonly contain low-level operating system and device driver code that is dependent on the hardware and upon which the rest of the operating system layers. In addition, a BSP might also contain other files containing directives, compilation parameters, and hardware parameters that are used to configure the operating system. Since a given Xilinx hardware platform is configurable, fixed board support packages are not possible. Therefore, a custom board support package must be generated for each hardware design that you create.
SDK can be used to create board support packages for third-party operating systems that are supported on the Xilinx processors. The board support package appears as a project in the SDK Navigator view. You can configure each BSP project in various ways and then run a BSP generation process. The BSP generation process typically ends with a collection of files generated in the workspace, which you must then take into the third-party environment to proceed with building the operating system and applications. The specifics of what files must be collected and how they must be used depends on the third-party operating system in question.
This short video is an introduction to the Zynq-7000 All Programmable SoC silicon hardware features. It presents at a high level the major elements of the devices: the Processing System, the Programmable Logic and the I/Os and also reviews the difference between the members of the Zynq-7000 family.
Xilinx is the inventor of the FPGA, programmable SoCs, and now, the ACAP. Our highly-flexible programmable silicon, enabled by a suite of advanced software and tools, drives rapid innovation across a wide span of industries and technologies - from consumer to cars to the cloud. Xilinx delivers the most dynamic processing technology in the industry, enabling rapid innovation with its adaptable, intelligent computing.
Product: Xilinx Zynq-7000 SoC Board Support Packages
Version: 2020.1 *
Supported Architectures: x64
Website Home Page :Language: englishCódigo:http://www.xilinx.com]www.xilinx.com
System Requirements: Linux **
Size: 170.2 mb
BSPs supported for the 2020.1 PetaLinux Release. Below contains list supported BSPs for Zynq-7000 SoC Board included in this release
xilinx-zc702-v2020.1-final.bsp
This BSP contains:
- Hardware: Design contains Zynq-7000 PS block (DDR, UART, SD, QSPI, Ethernet etc.) and AXI GPIO connected with led_4bits.
- Software: FSBL, U-boot, Linux, device-tree (includes Open AMP), rootfs (minimal packages).
- Pre-built Images: Ready to test images bitstream, FSBL, u-boot, Linux and rootfs for booting u-boot and Linux.
xilinx-zc706-v2020.1-final.bsp
This BSP contains:
- Hardware: Design contains Zynq-7000 PS block (DDR, UART, SD, QSPI, Ethernet etc.) and AXI GPIO connected with led_4bits, dip_switches_4bits, gpio_sws_3bits.
- Software: FSBL, U-boot, Linux, device-tree (includes Open AMP), rootfs (minimal packages).
- Pre-built Images: Ready to test images bitstream, FSBL, u-boot, Linux and rootfs for booting u-boot and Linux.
avnet-digilent-zedboard-v2020.1-final.bsp
This BSP contains:
- Hardware: Design contains Zynq-7000 PS block (DDR, UART, SD, QSPI, Ethernet etc.) and AXI GPIO connected with led_8bits, btns_5bits, sws_8bits.
- Software: FSBL, U-boot, Linux, device-tree (includes Open AMP), rootfs (minimal packages).
- Pre-built Images: Ready to test images bitstream, FSBL, u-boot, Linux and rootfs for booting u-boot and Linux.
Installation Requirements
The PetaLinux Tools Installation requirements are:
Minimum workstation requirements:
- 8 GB RAM (recommended minimum for Xilinx tools)
- 2 GHz CPU clock or equivalent (minimum of 8 cores)
- 100 GB free HDD space
Supported OS:
- Red Hat Enterprise Workstation/Server 7.4, 7.5, 7.6 (64-bit)
- CentOS Workstation/Server 7.4, 7.5, 7.6 (64-bit)
- Ubuntu Linux Workstation/Server 16.04.5, 16.04.6, 18.04.1,18.04.02 (64-bit)
Download link:Contenido oculto. Ha de estar registrado, y pulsar el botón "Gracias" para visualizar sus enlaces de descarga.
Si trás registrarse todavía no visualiza el botón de "gracias", pulse la tecla F5, para refrescar la página.
Citar
