MikroTik Internetworking Engineer with LABS

[lovewarez]

MikroTik Internetworking Engineer with LABS
Genre: eLearning | MP4 | Video: h264, 1280x720 | Audio: aac, 4410 Hz
Language: English | SRT | Size: 10.0 GB | Duration: 12h 45m

What you'll learn
Understand what is BGP routing protocol and where it is used
Understand what is the function on the Autonomous system
Understand how prefixes are being advertised in the internet
Understand how to configure eBGP neighboship
Understand how to configure eBGP Authentication using TCP MD5 Key
Understand where eBGP multihop should be used
Understand why iBGP should be configured on routers within the same AS
Understand what is the function of split horizon in iBGP
Understand what are the 4 BGP messages and the function of each of them
Understand what are the BGP states
Understand what is the BGP Route Path Selection
Understand what are the Attributes that are used in MikroTik for BGP
Understand how to configure BGP Weight Attribute on MikroTik
Understand how to configure BGP Local Preferece Attribute on MikroTik
Understand how to configure BGP AS Path Preprending Attribute on MikroTik
Understand how BGP Origin code Attribute works on MikroTik
Understand how to configure MED Attribute on MikroTik
Understand how to remove Private AS
Understand how to configure BGP in a single homed stub network
Configuring BGP Mutihomed stub network for ISP's failover
Configuring BGP Mutihomed non-stub network
Configuring Failover and Load-Balancing on BGP Mutihomed non-stub network
Usage of Route Filter to accept and discard advertised prefixes the way in and out
Understand what BGP Community is
Configure BGP community with AS Prepend Path
Understand the well-known BGP communities and difference between no export and no advertise
Configure no export BGP Community
Configure no advertise BGP Community
Understand what BGP aggregate can do
Configure BGP aggregate w/o Inherit Attributes
Understand what is BGP Route Reflector
Configure BGP Route Reflector inside an AS to reduce number of iBGP peers
Understand what is BGP Confederation
Configure BGP Route Confederation inside an AS to reduce number of iBGP peers
Understand what is MPLS and where to use it
Understand how to have a BGP free core in your ISP using MPLS
Understand the MPLS acronyms ((CE, PE, P, Label Push, Label Swap, Label Pop)
Configure MPLS using the static labeling
Configure MPLS using the dynamic labeling
Filter MPLS using Accept and Advertise Filter
Understand and configure VRF lite on MikroTik
Understand MPLS layer 3 VPN using VRF
Configure MPLS layer 3 VPN using VRF
Understand and configure MPLS layer 2 VPN using VPLS
Understand what is MPLS Traffic Engineering
Configure MPLS Traffic Engineering
Run VPLS over TE Tunnels
Requirements
Basic networking knowledge
Basic TCP/IP protocol knowledge
Knowledge about Interior routing protocol such as RIP and OSPF
Description
***This course is not officially sponsored by MikroTik and not an authorized course by MikroTik. We are neither affiliated with nor endorsed by MikroTik. We respect the Trademarks of the mentioned company and institution.***

MikroTik MTCINE is the hardest and the more complex course track in MikroTik. Actually it is the one and only advanced course between all MikroTik courses and it requires as a pre-requisite the MTCNA course as well as MTCRE course.

As being a complex course, I have decided to design this course in which I explain all topics of the MTCINE track. In this course, I will explain and do LABS about the Border Gateway Protocol (BGP) and Multiple Protocol Label Switching (MPLS) which are both considered very advanced topics and implemented inside the networks of the Internet Service Provider (ISP).

So in this course, I will cover the following topics:

• What is Autonomous System (AS)

• What is Border Gateway Protocol (BGP)?

• Path Vector algorithm

• BGP Transport and packet types

• iBGP and eBGP

• Stub network scenarios and private AS removal

• Non-stub scenarios

• iBGP and eBGP multi-hop and loopback usage

• Route distribution and routing filters

• BGP best path selection algorithm

• BGP prefix attributes and their usage

• BGP route reflectors and confederations

• MPLS basics

• Static label mapping

• Label Distribution Protocol (LDP)

• Penultimate-hop-popping

• MPLS traceroute differences

• LDP based VPLS tunnels

• Bridge split horizon

• BGP based VPLS

• BGP based layer3 tunnels (L3VPN)

• What is traffic engineering and how it works

• RSVP, static path, dynamic path (CSPF)

• Bandwidth allocation and bandwidth limitation differences and settings

All my courses will be based on LABS, so I advice you to run GNS3 with MikroTik CHR image to be able to follow this course because in some LABS you require to run 7 MikroTik Routers in 1 LAB.

Finally, if you want to master the topics of the MTCINE track, I advise you to enroll in my course and I will help you with your mission.

Who this course is for:
Engineers and students who wants to learn how to configure BGP routing protocol on MikroTik routers
Engineers who work in Internet Service Provider using MikroTik Routers and want to deploy MPLS
Students who want to be prepared for the MikroTik MTCINE exam

https://www.udemy.com/course/mikrotik-internetworking-engineer-with-labs-mtcine/

Contenido oculto. Ha de estar registrado, y pulsar el botón "Gracias" para visualizar sus enlaces de descarga.
Si trás registrarse todavía no visualiza el botón de "gracias", pulse la tecla F5, para refrescar la página.