Design V6 Engine SolidWorks Real World Project Masterclass

[0dayddl]

8.88 GB | 9min 56s | mp4 | 1280X720 | 16:9
Genre:eLearning |Language:English


Files Included :

1 Introduction To The Course.mp4 (26.54 MB)
2 Udemy Course Feedback.mp4 (2.05 MB)
1 Camshaft.mp4 (81.22 MB)
2 Rocker Spring.mp4 (107.97 MB)
3 Valve.mp4 (50.49 MB)
4 Camshaft Retainer.mp4 (59.73 MB)
5 Camshaft Bushing.mp4 (25.07 MB)
1 Connecting Camshaft and its bushings.mp4 (104.2 MB)
2 Placing the Retainers.mp4 (84.73 MB)
3 Adding valves and springs.mp4 (135.67 MB)
4 Placing all the valves and springs.mp4 (68.57 MB)
5 Cam Follower Mechanism.mp4 (102.8 MB)
6 Inserting the Rocker arm assemblies.mp4 (125.59 MB)
7 Placing all the sub-assemblies.mp4 (159.7 MB)
8 Valve actuating mechanism.mp4 (49.67 MB)
1 Valve cover Introduction.mp4 (7.9 MB)
2 Hole Wizard.mp4 (36.99 MB)
3 Cut, Draft and Fillet.mp4 (106.03 MB)
4 Front Cover Introduction.mp4 (6.66 MB)
5 Sketching the Cover body.mp4 (55.4 MB)
6 Extrude and Draft.mp4 (35.78 MB)
7 Fillet and Shell.mp4 (73.74 MB)
1 Upper Block Assembly Part 1.mp4 (145.02 MB)
2 Upper Block Assembly Part 2.mp4 (157.45 MB)
3 Upper Block Assembly Part 3.mp4 (162.89 MB)
4 Upper Block Assembly Part 4.mp4 (174.48 MB)
5 Upper Block Assembly Part 5.mp4 (171.93 MB)
1 Sketching Air Filter spikes.mp4 (39.13 MB)
2 Lofted Boss Base.mp4 (78.47 MB)
3 Sketching Air Turbo body.mp4 (70.9 MB)
4 Boundary Boss Base.mp4 (82.97 MB)
5 Surface Features.mp4 (113.18 MB)
6 Belt Wheel Introduction.mp4 (8.61 MB)
7 Revolved Boss Base.mp4 (24.22 MB)
8 Circular Pattern to multiply the slots.mp4 (76.43 MB)
9 Second Belt Wheel.mp4 (49.86 MB)
1 Placing the covers.mp4 (118.84 MB)
10 Editing the animation video.mp4 (91.19 MB)
2 Mating the Belt wheels.mp4 (139.52 MB)
3 Working of the V6 engine.mp4 (39.33 MB)
4 Air components and Intake manifold.mp4 (147.81 MB)
5 3D sketch and Sweep to create hose.mp4 (85.37 MB)
6 Second Hose.mp4 (120.81 MB)
7 Adding the Exhaust Manifolds.mp4 (83.85 MB)
8 Mating the filters and Transparency.mp4 (116.31 MB)
9 Creating animation videos.mp4 (95.98 MB)
1 V6 Pistons Animation.mp4 (124.31 MB)
2 MBD Analysis on the V6 Pistons.mp4 (81.17 MB)
3 Rocker animation.mp4 (98.08 MB)
4 Rocker Valve Animation.mp4 (92.34 MB)
5 MBD Analysis of the Cylinder Head.mp4 (124.56 MB)
6 Modified Crankshaft MBD.mp4 (48.49 MB)
7 Piston assembly for MBD.mp4 (63.98 MB)
8 Mating the Piston assembly.mp4 (77.25 MB)
9 Offset analysis Piston Assembly.mp4 (95.47 MB)
1 Creating Drawing Layout of the Parts.mp4 (32.81 MB)
2 Dimensioning in the sheet.mp4 (80.5 MB)
3 Detailed and Section views.mp4 (100.46 MB)
4 Creating Part Images and Views.mp4 (109.89 MB)
5 Final snaps of the V6 Engine.mp4 (172.83 MB)
1 Introduction to Solidworks.mp4 (30.2 MB)
2 Udemy Course Feedback.mp4 (2.07 MB)
3 Introduction to Sketch Tools.mp4 (3.79 MB)
4 Line and Rectangle.mp4 (59.66 MB)
5 Circle Arc, Ellipse.mp4 (61.54 MB)
6 Dimensions and Relations.mp4 (72.6 MB)
7 Slots Polygon and Fillets.mp4 (74.36 MB)
8 Sketch Modifiers.mp4 (62.84 MB)
9 Sketch Modifiers -2.mp4 (68.04 MB)
1 Part Modelling Introduction.mp4 (4.31 MB)
2 Extrudes Boss.mp4 (106.54 MB)
3 Cuts Feature.mp4 (118.94 MB)
1 Introduction.mp4 (8.64 MB)
10 Creating the slots.mp4 (88.51 MB)
11 Filleting the edges.mp4 (93.89 MB)
12 Changing the Appearance.mp4 (9.13 MB)
2 Part in SolidWorks.mp4 (5.87 MB)
3 Basic SolidWorks Interface and tips.mp4 (15.45 MB)
4 Sketching the Front face of the block.mp4 (65.34 MB)
5 Extruded Boss Base Feature.mp4 (10.43 MB)
6 Extruded Cut to generate the Cylinders.mp4 (38.54 MB)
7 Cutting using the Contours.mp4 (74.46 MB)
8 Rib and Mirror Features.mp4 (97.78 MB)
9 Copy Feature to generate the 2nd Half.mp4 (43.23 MB)
1 Creating Piston Body.mp4 (53.92 MB)
2 Linear Pattern to create ring slots.mp4 (69.91 MB)
3 Filleting the edges.mp4 (50.18 MB)
4 Connecting Rod (Top) Extrusion.mp4 (66.55 MB)
5 Creating Slots.mp4 (57.09 MB)
6 Hole creation and Filleting.mp4 (83.94 MB)
7 Connecting Rod (Bottom).mp4 (94.56 MB)
8 Piston Pin.mp4 (40.22 MB)
9 Assembly of the Parts.mp4 (52.28 MB)
1 Rocker arm body.mp4 (48.96 MB)
2 Extruded cutting and Chamfering.mp4 (72.41 MB)
3 Rocker Wheel.mp4 (40.18 MB)
4 Rocker Pin.mp4 (51.5 MB)
5 Rocker Pin (Long).mp4 (34.34 MB)
6 Making the Assembly.mp4 (142.19 MB)
1 Introduction.mp4 (12.38 MB)
2 Creating the Body with Extrude.mp4 (65.69 MB)
3 Lofted Cut to create passage.mp4 (53.02 MB)
4 Replicating passages by Linear Pattern.mp4 (34.24 MB)
5 Using Hole Wizard.mp4 (68.77 MB)
6 Holes at the bottom face.mp4 (47.52 MB)
7 Linear Pattern and Filleting.mp4 (100.88 MB)
1 Modeling the Crank.mp4 (97.26 MB)
2 Linear Pattern to make the Crankshaft.mp4 (91.16 MB)
3 Modeling Oil Pan Body.mp4 (105.32 MB)
4 Filleting and Point Creation.mp4 (70.46 MB)
5 Hole Wizard, Draft and Shell.mp4 (122.61 MB)
6 Crankshaft Bushing.mp4 (40.96 MB)
7 Lower Block Assembly.mp4 (68.97 MB)
8 Copy with mates.mp4 (144.48 MB)
1 Exhaust Manifold Introduction.mp4 (10.51 MB)
2 Sketching the base.mp4 (77.24 MB)
3 Boundary Boss Base.mp4 (111.72 MB)
4 Creating the second configuration.mp4 (91.66 MB)
5 Sketching the Intake Manifold.mp4 (56.92 MB)
6 Sketching on the Reference Plane.mp4 (65.74 MB)
7 Boundary Boss Base and Shell.mp4 (54.24 MB)
8 Filleting and Combine feature.mp4 (118.67 MB)

]
Screenshot

Contenido oculto. Ha de estar registrado, y pulsar el botón "Gracias" para visualizar sus enlaces de descarga.
Si trás registrarse todavía no visualiza el botón de "gracias", pulse la tecla F5, para refrescar la página.

Contenido oculto. Ha de estar registrado, y pulsar el botón "Gracias" para visualizar sus enlaces de descarga.
Si trás registrarse todavía no visualiza el botón de "gracias", pulse la tecla F5, para refrescar la página.

Contenido oculto. Ha de estar registrado, y pulsar el botón "Gracias" para visualizar sus enlaces de descarga.
Si trás registrarse todavía no visualiza el botón de "gracias", pulse la tecla F5, para refrescar la página.